I tried booting my ThinkPad P51 coreboot port (for the first time) today, and it reached ramstage, but seems to be hanging somewhere in post_mp_init for some reason. The last lines in the flashconsole log are:
bsp_do_flight_plan done after 15 msecs.
CPU: frequency set to 4000 MHz
Enabling SMIs.
Locking SMM.
VMX status: enabled
VMX status: enabled
IA32_FEATURE_CONTROL status: locked
VMX status: enabled
my pico 2 can’t reliably write to the flash chip, sometimes it fails with an error like
Verifying flash... FAILED at 0x00823901! Expected=0xfa, Found=0xff, failed byte count from 0x00000000-0x00ffffff: 0x1
maybe the drive strength is insufficient (even though I have it set to the maximum the pico 2 can provide (12mA))
it’s not really a big problem though since I can just retry and it usually succeeds
@noisytoot > USB flasher (a pi pico 2)
wait you van just do that with a pico???
(of course I realize this right after I buy a ch341a... though tbf it is still probably useful regardless)
@noisytoot since I already bought a ch341a, do you think I could just use the clips and 1.8v converter from it with a pico?
I have a pico h lying around that I could easily use for this
@noisytoot I'm still not going to use it without checking the voltage first (and I don't have any tools for measuring voltage at the moment) if I can use a pico h I already have
@noisytoot the hardware I'm going to flash the bios of is a few historically interesting chromebook models. as such I absolutely do NOT want to risk it